{"id":9652,"date":"2024-09-08T11:49:06","date_gmt":"2024-09-08T17:49:06","guid":{"rendered":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/?p=9652"},"modified":"2024-09-12T09:07:42","modified_gmt":"2024-09-12T15:07:42","slug":"large-assignment-1-2","status":"publish","type":"post","link":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/2024\/09\/08\/large-assignment-1-2\/","title":{"rendered":"Large Assignment 1"},"content":{"rendered":"\n

Part 1: Curves<\/h3>\n\n\n\n
    \n
  1. Make the specific footprint below.<\/li>\n<\/ol>\n\n\n\n
    \"\"<\/figure>\n\n\n\n

    2. Make 2 closed rounded curves using the various curve commands.<\/p>\n\n\n\n

      \n
    1. <\/li>\n<\/ol>\n\n\n\n
      \"\"<\/figure>\n\n\n\n

      3. Make 2 closed curves using polygon, ellipse, or circle<\/p>\n\n\n\n

        \n
      1. <\/li>\n<\/ol>\n\n\n\n
        \"\"<\/figure>\n\n\n\n

        4. Make 2 open curves<\/p>\n\n\n\n

          \n
        1. <\/li>\n<\/ol>\n\n\n\n
          \"\"<\/figure>\n\n\n\n

          5. Import a picture and trace an image<\/p>\n\n\n\n

            \n
          1. <\/li>\n<\/ol>\n\n\n\n
            \"\"<\/figure>\n\n\n\n

            6. Pick one open curve, and one closed rounded curve and make three copies of each.<\/p>\n\n\n\n

              \n
            1. <\/li>\n<\/ol>\n\n\n\n
              \"\"<\/figure>\n\n\n\n

              7. Take at least 3 of your closed curves and overlap them to create a new shape<\/p>\n\n\n\n

                \n
              1. <\/li>\n<\/ol>\n\n\n\n
                \"\"<\/figure>\n\n\n\n

                8. Use split, delete, and trim to combine these curves into one open curve<\/p>\n\n\n\n

                  \n
                1. <\/li>\n<\/ol>\n\n\n\n
                  \"\"<\/figure>\n\n\n\n

                  9. Take at least two curves and use various transformations make a pattern or composition.<\/p>\n\n\n\n

                    \n
                  1. <\/li>\n<\/ol>\n\n\n\n
                    \"\"<\/figure>\n\n\n\n
                    Rhino file: SamDauk_Curves<\/a>Download<\/a><\/div>\n\n\n\n

                    Part 2: Surfaces<\/h3>\n\n\n\n
                      \n
                    1. Plane<\/li>\n<\/ol>\n\n\n\n
                        \n
                      1. <\/li>\n<\/ol>\n\n\n\n
                        \"\"<\/figure>\n\n\n\n

                        2. PlanarSrf<\/p>\n\n\n\n

                          \n
                        1. <\/li>\n<\/ol>\n\n\n\n
                          \"\"<\/figure>\n\n\n\n

                          3. EdgeSrf<\/p>\n\n\n\n

                            \n
                          1. <\/li>\n<\/ol>\n\n\n\n
                            \"\"<\/figure>\n\n\n\n

                            4. ExtrudeCrv<\/p>\n\n\n\n

                              \n
                            1. <\/li>\n<\/ol>\n\n\n\n
                              \"\"<\/figure>\n\n\n\n

                              5. ExtrudeCrvAlongCrv<\/p>\n\n\n\n

                                \n
                              1. <\/li>\n<\/ol>\n\n\n\n
                                \"\"<\/figure>\n\n\n\n

                                6. Loft<\/p>\n\n\n\n

                                  \n
                                1. <\/li>\n<\/ol>\n\n\n\n
                                  \"\"<\/figure>\n\n\n\n

                                  7. Sweep1<\/p>\n\n\n\n

                                    \n
                                  1. <\/li>\n<\/ol>\n\n\n\n
                                    \"\"<\/figure>\n\n\n\n

                                    8. Sweep2<\/p>\n\n\n\n

                                      \n
                                    1. <\/li>\n<\/ol>\n\n\n\n
                                      \"\"<\/figure>\n\n\n\n

                                      9. Revolve<\/p>\n\n\n\n

                                        \n
                                      1. <\/li>\n<\/ol>\n\n\n\n
                                        \"\"<\/figure>\n\n\n\n

                                        10. RailRevolve<\/p>\n\n\n\n

                                          \n
                                        1. <\/li>\n<\/ol>\n\n\n\n
                                          \"\"<\/figure>\n\n\n\n
                                          Rhino File: SamDauk_Surfaces<\/a>Download<\/a><\/div>\n\n\n\n

                                          Part 3: Solids<\/h3>\n\n\n\n
                                            \n
                                          1. Box<\/li>\n<\/ol>\n\n\n\n
                                            \"\"<\/figure>\n\n\n\n

                                            2. Cylinder<\/p>\n\n\n\n

                                              \n
                                            1. <\/li>\n<\/ol>\n\n\n\n
                                              \"\"<\/figure>\n\n\n\n

                                              3. Sphere<\/p>\n\n\n\n

                                                \n
                                              1. <\/li>\n<\/ol>\n\n\n\n
                                                \"\"<\/figure>\n\n\n\n

                                                4. ExtrudeCrv and Cap<\/p>\n\n\n\n

                                                  \n
                                                1. <\/li>\n<\/ol>\n\n\n\n
                                                  \"\"<\/figure>\n\n\n\n

                                                  5. Pipe<\/p>\n\n\n\n

                                                    \n
                                                  1. <\/li>\n<\/ol>\n\n\n\n
                                                    \"\"<\/figure>\n\n\n\n

                                                    6. MoveFace<\/p>\n\n\n\n

                                                      \n
                                                    1. <\/li>\n<\/ol>\n\n\n\n
                                                      \"\"<\/figure>\n\n\n\n

                                                      7. MoveEdge<\/p>\n\n\n\n

                                                        \n
                                                      1. <\/li>\n<\/ol>\n\n\n\n
                                                        \"\"<\/figure>\n\n\n\n

                                                        8. OffsetSrf<\/p>\n\n\n\n

                                                          \n
                                                        1. <\/li>\n<\/ol>\n\n\n\n
                                                          \"\"<\/figure>\n\n\n\n

                                                          9. BooleanUnion<\/p>\n\n\n\n

                                                            \n
                                                          1. <\/li>\n<\/ol>\n\n\n\n
                                                            \"\"<\/figure>\n\n\n\n

                                                            10. BooleanDifference<\/p>\n\n\n\n

                                                              \n
                                                            1. <\/li>\n<\/ol>\n\n\n\n
                                                              \"\"<\/figure>\n\n\n\n

                                                              11. Boolean Intersection<\/p>\n\n\n\n

                                                                \n
                                                              1. <\/li>\n<\/ol>\n\n\n\n
                                                                \"\"<\/figure>\n\n\n\n

                                                                12. BooleanSplit<\/p>\n\n\n\n

                                                                  \n
                                                                1. <\/li>\n<\/ol>\n\n\n\n
                                                                  \"\"<\/figure>\n\n\n\n

                                                                  13. Using the surfaces and solids you modeled and the Boolean tools, make three solid shapes you find interesting.<\/p>\n\n\n\n

                                                                    \n
                                                                  1. <\/li>\n<\/ol>\n\n\n\n
                                                                    \"\"<\/figure>\n\n\n\n
                                                                    rhino file: SamDauk_Solids<\/a>Download<\/a><\/div>\n\n\n\n

                                                                    Part 4: 3D Printing<\/p>\n\n\n\n

                                                                    I chose to 3d print a simple sphere. I know a sphere is probably not the most interesting object to choose, but I was really drawn to printing one because I think it looks pretty cool. I wanted to make it a little more interesting by adding a high amount of infill to increase the weight. My original plan was to do somewhere between 50-100% infill, but unfortunately I couldn’t justify the near 20-30 hour print times and ended up opting for 30% infill. The sphere does still have a good bit of weight to it so I am still happy with the result. Below is an image of the print in progress (about 40% completion).<\/p>\n\n\n\n

                                                                    \"\"<\/figure>\n\n\n\n

                                                                    My first few prints failed due to bad build plate adhesion, so for the final sphere I chose to use “raft” adhesion to keep it grounded to the build plate. This particular image is not the same sphere as the final print because I forgot to take a photo during the print process. I reprinted another sphere with less infill to make the print quick so I could get the photo, but otherwise all the settings are identical. For the supports I chose to use “tree” supports to minimize unnecessary pla usage. The final product took about 10 hours to print and has a diameter of 3 inches. Below are photos of the final result.<\/p>\n\n\n\n

                                                                    \"\"<\/figure>\n\n\n\n
                                                                    \"\"<\/figure>\n\n\n\n
                                                                    \"\"<\/figure>\n","protected":false},"excerpt":{"rendered":"

                                                                    Part 1: Curves 2. Make 2 closed rounded curves using the various curve commands. 3. Make 2 closed curves using polygon, ellipse, or circle 4. Make 2 open curves 5. Import a picture and trace an image 6. Pick one open curve, and one closed rounded curve and make three copies of each. 7. Take at least 3 of your […]<\/p>\n","protected":false},"author":66,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[50],"tags":[54],"class_list":["post-9652","post","type-post","status-publish","format-standard","hentry","category-lg1_24","tag-presentation1"],"_links":{"self":[{"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/posts\/9652","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/users\/66"}],"replies":[{"embeddable":true,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/comments?post=9652"}],"version-history":[{"count":7,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/posts\/9652\/revisions"}],"predecessor-version":[{"id":10224,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/posts\/9652\/revisions\/10224"}],"wp:attachment":[{"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/media?parent=9652"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/categories?post=9652"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/tags?post=9652"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}