{"id":3458,"date":"2022-04-12T02:55:38","date_gmt":"2022-04-12T02:55:38","guid":{"rendered":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/?p=3458"},"modified":"2022-05-10T16:26:57","modified_gmt":"2022-05-10T16:26:57","slug":"la4-ruby-ta","status":"publish","type":"post","link":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/2022\/04\/12\/la4-ruby-ta\/","title":{"rendered":"LA4 – Ruby Ta"},"content":{"rendered":"\n

I adapted the research paper about the extruder turtle library that was written by Franklin Pezzuti Dyer and Professor Leah Buechley to come up with the designs for my shapes in this project (https:\/\/handandmachine.org\/publications\/Extruder_Turtle.pdf<\/a>). I was amazed by the 3D printed vessels from the Emerging Objects website (http:\/\/emergingobjects.com\/project\/gcode-clay\/<\/a>) and I wanted to create these types of patterns\/designs they have on their vessels. <\/p>\n\n\n\n

\"\"
Vessels from Emerging Objects<\/figcaption><\/figure>\n\n\n\n

By understanding the clay material and its behavior, I created normal vessels with some adjustments to make the turtle go in and out of the vessels\u2019 surfaces to create interesting clay-dropping and textile-like styles. I made the turtle travel out for about 1-10 millimeters from the vessels\u2019 surface at a 45-degree angle then travel back to the surface to continue with the shapes. The shapes I created using the extruder library cannot be generated by a traditional slicer because the bumps\/loops on the vessels consist of closed loops with endpoints lying on the vessels\u2019 walls which are not perpendicular to the vessels\u2019 walls , nor do they have sharp corners. After being extruded, these bumps and loops deform and sag under their own weight. Since unbaked clay is naturally heavy, this aspect allows me to create very interesting designs for my shapes.<\/p>\n\n\n\n

The image below shows the base and first two layers of the vessel I created. These triangles in the images are what I had to make the dropping effect. <\/p>\n\n\n\n

\"\"
Base shape and first two layer of the wall<\/figcaption><\/figure>\n\n\n\n

For most of my vessels, I made the turtle travel out from the vessels’ walls at a 45-degree angle for a few millimeters (the bigger the size is the longer the dropping loops are) then return back to the wall (the same length it travels out before) and that creates another 45-degree angle<\/p>\n\n\n\n

\"\"
Create bumping effect to the vessels<\/figcaption><\/figure>\n\n\n\n

Below is the first vessel I created using the bump’s size equal to 5 millimeters. This shape is big at the bottom and gets smaller and small at the top.<\/p>\n\n\n\n

\"\"
First shape generated shape in Rhino (top-down)<\/figcaption><\/figure>\n\n\n\n
\"\"
First shape generated shape in Rhino (side view)<\/figcaption><\/figure>\n\n\n\n

<\/p>\n\n\n\n

\"\"
First shape in Cura<\/figcaption><\/figure>\n\n\n\n
\"\"
3D printed shape 1 (side view)<\/figcaption><\/figure>\n\n\n\n
\"\"
3D printed shape 1 (top-down)<\/figcaption><\/figure>\n\n\n\n

I met a lot of difficulties when working on 3D printing this first shape. Because I am new to the clay 3D printer, I didn’t know that I have to adjust all the parameters to create the distance between each level and each layer. Some shapes actually require shorter layer height while some require more space. I have learned that the base requires significantly more space between each layer. Since I didn’t set it up the right way and that didn’t give it enough space between each layer, so the clay has always built up and created a very tall chunk of clay.<\/p>\n\n\n\n

\"\"
Failed to build the base layer of the vessel<\/figcaption><\/figure>\n\n\n\n

After printing this shape, I wanted to increase the size of the bumps\/loops to make it more like the vessels from the Emerging Objects website. I generated more interesting shapes and use much bigger loops sizes (7-10 millimeters).<\/p>\n\n\n\n

\"\"
More shapes created in Rhino<\/figcaption><\/figure>\n\n\n\n
\"\"
Waving vase<\/figcaption><\/figure>\n\n\n\n
\"\"
More shape in Cura<\/figcaption><\/figure>\n\n\n\n
\"\"
More shape in Cura<\/figcaption><\/figure>\n\n\n\n

Unfortunately, I was not successfully printing any of these new shapes. I have tried to modify all the parameters to try to make the shape more stable. However, I’m not sure if I calculated the layers wrong or if the vessels’ walls are just not stable enough to hold those new bumps\/loops since they are significantly bigger and heavier than before. The vessels usually collapsed after they got a little bit tall.<\/p>\n\n\n\n

\"\"
The wall failed to hold bigger and more crowded loops<\/figcaption><\/figure>\n\n\n\n
\"\"
The wall failed to hold bigger and more crowded loops<\/figcaption><\/figure>\n\n\n\n
\"\"
The wall failed to hold bigger and more crowded loops<\/figcaption><\/figure>\n\n\n\n
\"\"
The wall failed to hold bigger and more crowded loops<\/figcaption><\/figure>\n\n\n\n

After failing to print these vessels so many times, I decided to create a smaller and taller base for the vessels, decreased the loops’ size, and made those loops occur less frequently. I chose the basic cylindrical shape for this vessel.<\/p>\n\n\n\n

\"\"
shape 2 in Rhino<\/figcaption><\/figure>\n\n\n\n
\"\"
Shape 2 in Rhino<\/figcaption><\/figure>\n\n\n\n
\"\"
Shape 2 in Cura<\/figcaption><\/figure>\n\n\n\n
\"\"
Shape 2 – in-process printing <\/figcaption><\/figure>\n\n\n\n
\"\"
Shape 2 -completed<\/figcaption><\/figure>\n\n\n\n
\"\"
Shape 2 -completed<\/figcaption><\/figure>\n\n\n\n
\"\"
Shape 2 -completed<\/figcaption><\/figure>\n\n\n\n

I also created a few more different shapes to print. One of them is the basic random-bumps-on-surface vessel. Points are randomly generated on the vessel’s wall in each layer. <\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n

I expected it to be a very interesting looking vessel; however, the 3D clay printed stopped working when I was printing this one. Because we forgot to check the loader carefully before attaching it to the printer, the loader couldn’t push the clay out anymore. We also were not able to fix the loader and so that I was not able to finish printing my last piece for this project.<\/p>\n\n\n\n

Code: <\/p>\n\n\n\n

RubyTa_LA4<\/a>Download<\/a><\/div>\n\n\n\n

Shape 3<\/h2>\n\n\n\n

I finally had a chance to print, fire, and glaze the last shape as I worked on the final project<\/p>\n\n\n\n

\"\"
shape 3<\/figcaption><\/figure>\n\n\n\n
\"\"
shape 3<\/figcaption><\/figure>\n\n\n\n

I also printed a few more shapes and glazed my two other shapes.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n","protected":false},"excerpt":{"rendered":"

I adapted the research paper about the extruder turtle library that was written by Franklin Pezzuti Dyer and Professor Leah Buechley to come up with the designs for my shapes in this project (https:\/\/handandmachine.org\/publications\/Extruder_Turtle.pdf). I was amazed by the 3D printed vessels from the Emerging Objects website (http:\/\/emergingobjects.com\/project\/gcode-clay\/) and I wanted to create these types of patterns\/designs they have on […]<\/p>\n","protected":false},"author":11,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[18],"tags":[],"class_list":["post-3458","post","type-post","status-publish","format-standard","hentry","category-large-assignment-4-g-code"],"_links":{"self":[{"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/posts\/3458","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/comments?post=3458"}],"version-history":[{"count":2,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/posts\/3458\/revisions"}],"predecessor-version":[{"id":4990,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/posts\/3458\/revisions\/4990"}],"wp:attachment":[{"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/media?parent=3458"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/categories?post=3458"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/handandmachine.org\/classes\/computational_fabrication\/wp-json\/wp\/v2\/tags?post=3458"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}